Time and Date setting on the Siemens HiPath 3000
Monday, 12 October 2009 11:58 | 
Written by Mike | 
| 
| 
Programming can be done from either of the two lowest extension numbers.
1. Leave the handset on the phone
2. Dial * 9 5 to enter programming
3. at Username dial 3 1 9 9 4 then press √ or OK
4. at Password dial 3 1 9 9 4 and press √ or OK
5. Dial 1 9 for ‘Display Text Menu’
6. To set time dial 1 3
7. Press * to change and enter time in 24 hour mode
8. Press √ or OK to save
9. To exit programming press the button marked ‘service’ OR go to step 10 if you want to change the date.
10. Dial 1 4 and press * to change the date
11. Enter date as dd mm yy and press ü to save
12. Exit programming by pressing the ‘service’ button
Last Updated (Monday, 19 April 2010 11:51)